REFINISHING PRICELIST
Prices adjusted 12/05/04 - PDF Download

REFINISHING PRICELIST Direct
Chrome		 Nickel Electrolytic Black
Chrome		 EnduraCoat Hot Blue EnduraCoat
Camo Polymer
HAND GUNS            
Matte
No Flaw Removal		 129.00 129.00 175.00 216.00 111.00 304.00
Matte
Flaw removal		 170.00 170.00 216.00 N/A 158.00 N/A
Brushed
400 Grit Polish		 170.00 170.00 N/A N/A 158.00 N/A
LONG GUNS            
Matte
No Flaw Removal		 167.00 167.00 222.00 246.00 136.00 380.00
Matte
Flaw removal		 222.00 222.00 280.00 N/A 181.00 N/A
Brushed
400 Grit Polish		 222.00 222.00 N/A N/A 181.00 N/A
DBL. BARRELS            
Matte
No Flaw Removal		 175.00-234.00 175.00-234.00 N/A 280.00-345.00 164.00-222.00 409.00
MINIMUM
Matte
Flaw removal		 228.00-304.00 228.00-304.00 N/A Silver
Soldered		 205.00-263.00 Silver
Soldered
Brushed
400 Grit Polish		 228.00-304.00 228.00-304.00 N/A Barrels
Only		 205.00-263.00 Barrels Only

 

Notes:
 1)  Bright Master Polish Finishes - ADD $100.00 to Brushed Finish. These Bright Master finishes are for firearms with only minor flaws, even new roughly built firearms can incur these charges.
2)  Rough Firearms  can add up to $50.00 Additional.
3) Gold or Rhodium small parts are $20.00 each. 
4) Entire pistol $225.00
5) Very expensive long guns (over $3000) start at 10% of value.


 

Additional Charges for Refinishing That You May Incur
Read this section carefully and call if you need exact quote:
General Parts or Services Needed Parts Relative to Handguns
Extra Magazines 12.00 Caspian High Capacity Frames      (BRUSH) 23.00
STI Magazine Guides 18.00 Caspian High Capacity Frames      (MATTE) 12.00
STRIP Chrome/Nickel or Paint 23.00 Para-Ordnance Hi-Cap
Frame        (BRUSH)		 47.00
Scope Mounts 23.00 Para-Ordnance Hi-Cap
Frame        (MATTE)		 23.00
Compensated Guns 29.00 Para-Ordnance Dis/ Re-assemble,   LDA 41.00
Aluminum Frame Extra 29.00 Desert Eagle  (BRUSH)
IMI - Old Production		 29.00
Adjustable Rear Sight 29.00 Desert Eagle  (BRUSH)
New Model and SAKO		 88.00
Sight Ribs 29.00 Underlugs 12.00
100% Brush 18.00 Severely Pitted 29.00-58.00
Blacken Front Sight 6.00 Bull Barrel Revolver 18.00
Replace Front Sight Insert 18.00 Magazine Tubes Only 7.00
T.C. Contender
H & K P-7		 18.00 Extra Assembly on Magazines 14.00
Beretta - Current Production 53.00 Extra Assembly on Barrels 18.00
Remove and Re-install Revolver Barrels 18.00    

 

ADDITIONAL REFINISHING CHARGES FOR LONG GUNS
Alloy Trigger Group 18.00 Folding Stocks 59.00
Scope Bases    (Steel) 12.00 Octagon Barrels 29.00
Lever Actions 18.00 Extended Magazine Tube 18.00
Scope Bases (Aluminum) 18.00 Hi-Capacity
Rifle Magazines		 25.00
Scope Rings 18.00 STRIP  Chrome/Nickel Guns 47.00
Military Firearms 41.00 "Bluing" Nickel Steel 18.00
Camo  2 piece Stock 76.00 Camo  1 piece Stock 99.00
1)  High Carbon Steel Receivers (Plate Only) 29.00 Remove and Re-Install Barrels 18.00
2)  Nickel Stain High Carbon steel at time of Plating 29.00 add'l
$58.00 Total		 Double Barrel (1and 2) $88.00

 

PARTS OF FIREARMS ONLY (BY PERCENTAGE)
Go to the Plating Pricing table and select the finish you want.  Lets say you wanted
to plate a slide only in Brush Chrome.  Price 145.00 for the whole gun.  Slide only is 40%
of $145.00 or cost to you is $58.00.

Handguns

 Long Guns
Frame Only 53% Shotgun/Rifle Receivers 70%
Slide Only 47% Bolt Action Barrel 59%
Handgun Barrels 13-35% Bolt Action Receiver 59%
Frame Assembly 88% Bolt Action Barreled Receivers Only 82%
Slide Assembly 65% Double Barrel Shotgun Barrel Only 88%
Single Action Revolver Frame 41% Shotgun Barrels 59%
    Ribbed Shotgun Barrel 70%
    Double Barrel Shotgun Receiver and Fore-end 88%