Gunsmithing Prices

Apwcogan Price List 2015-2016 Subject To Change

 

 

Process Or Gunsmithing Application

Cost

See Bottom Of Page For Notas (Notice To All Shooters)

 

Some Parts May Require Refinishing After Adjustments Are Made.

 

 

 

Glock Firearms

 

Street Action Job

$115.00

Porting Depends on Barrel Length

-2 port $145.00

 

-3 port $150.00

Throat and Polish Feed Ramp

$45.00

Fitting Aftermarket Barrels

$150.00

Jewel Barrel Chamber

$50.00

Fitting Aftermarket Parts

$35.00

Fit Ambidextrous Parts 

$65.00

Custom Made Accessories (Minimum) 

$95.00

Stippling Handgrip

$90.00

Fit Replacement Sights in Original Cuts - Minium

$50.00

Grip Reduction

$145.00

Round Bottom Front of Trigger Guard 

$25.00

Trigger Guard Undercut

$20.00

Remove Finger Grooves

$50.00

 

 

Sig-Sauer Firearms 

 

Street Action Job 

$100.00

Porting - 2 0r 3 Ports Depends on Model

$135.00

Throat and Polish Feed Ramp 

$45.00

Aftermarket Barrels

$150.00

Jewel Barrel Chamber 

$50.00

Hammer or Trigger

$40.00 

Funnel The Magazine Well 

$65.00 

Aftermarket Parts

$35.00 

Fit Ambidextrous Parts 

$65.00 

Custom Made Accessories (Minimum) 

$95.00

Stippling Front or Back Strap

$130.00

Night Sight Installation (Factory) 

$55.00 

Fit Replacement Sights in Original Cuts 

Minimum $50.00 

 

 

Browning And Eaa

 

Street Action Job

$115.00

Competition Single Action Only E.A.A 

$140.00

Porting - 2 or 3 Ports Depends on Model 

$135.00 

Throat and Polish Feed Ramp 

$45.00 

Fitting Aftermarket Barrels

$150.00 

Jewel Barrel Chamber

$50.00 

Jewel Hammer or Trigger 

$40.00 

Stippling Front Strap 

$130.00

Stippling Back Strap 

$130.00 

Checkering Front Strap (40 LPI) Browning HP 

$260.00 

Checkering Back Strap (40 LPI) Browning HP 

$260.00 

The Magazine Well 

$85.00

Beavertail Grip Custom Welded 

$180.00 

Fitting Aftermarket Parts 

$35.00

Fit Ambidextrous Parts 

$65.00

Custom Made Accessories (Minimum) 

$95.00 

Night Sight Installation (Factory) 

$55.00

Fit Replacement Sights in Original Cuts 

Minimum $50.00 

 

 

Beretta, Taurus, S&W, Kahr

 

Street Action Job 

$115.00

Porting - 2 0r 3 Ports Depends on Model 

$135.00

Throat and Polish Feed Ramp 

$45.00 

Fitting Aftermarket Barrels 

$150.00 

Jewel Barrel Chamber 

$50.00 

Funnel The Magazine Well 

$35.00 

Fitting Aftermarket Parts 

$35.00 

Fit Ambidextrous Parts 

$65.00 

Custom Made Accessories (Minimum) 

$95.00 

Stippling Front or Back Strap 

Call For Pricing 

Night Sight Installation (Factory) 

$50.00 

Fit Replacement Sights in Original Cuts

Minimum $50.00 

 

 

General Smithing Revolvers

 

Magna Porting 

$135.00 

Internal Barrel Comp on Applicable Revolvers 

$230.00 

Thumb Latch for Speed Loaders 

$25.00 

Install NO-DRILL Scopes and Bases 

$30.00 

Bore sight and Zero scope (Labor) 

$35.00 

Checker Front Of Trigger Guard 

$75.00 

Shorten barrel and Reinstall Front sight 

$200.00 

Number Cylinder Chambers 

$15.00 

Champher Cylinder Chambers 

$20.00 

Convert Square Butt S&W (K,L,N) to K Frame Round Butt 

$125.00 

Smooth Serrated Trigger 

$35.00 

Bobbed Hammer 

$50.00 

Final Fitting Revolver Barrel 

$95.00 

Jewel Trigger or Hammer 

$50.00 

Crane Lock Installed 

$40.00 

Bevel Hammer Spur 

$30.00

S &W Factory Safety Check and Adjustments If Part Needed 

$55.00 

 Parts and it’s Labor not included

Market price 

Street Action Job (Most American Handguns) 

$95.00 

Match Quality Action Job 

$190.00 

3 Inch Comped Bull Barrel Outside Diameter Matches Frame 

$500.00 

Round Barrel Dovetail (Cut For Front Sight) 

$85.00 

S & W Style Orange Cut into Factory Sight 

$65.00 

Replace Orange Insert 

$35.00 

Zero Firearm (all) Minimum Plus Cost of Ammo 

$35.00 

Adjust Barrel and Cylinder Gap 

$50.00

Oversize Thumb Latch 

Market price

Modify Thumb Latch For Speed-loaders 

$25.00 

 

 

General Smithing - Ppc Revolvers (On Your Firearm)

 

 

 

General Smithing - Ppc Revolvers (On Your Firearm) 

 

See Notas: 

 

Complete with Crane Lockup Only

$1,124.00 

Complete with Triple Crane Lockup Only 

$1,279.00 

Refinishing Sight Ribs 

$50.00 

Shilen 1 in 14 Twist Barrel ADD 

$50.00 

Integral Scope Mount Machined to Barrel 

$175.00 

Magna Porting 

$135.00 

Compensator System with Cover sleeve 

$300.00 

Internal Barrel Comp - The internal comp uses 3/4of an inch of the barrel as the expansion chamber

$230.00

 

 

Colt 1911 Automatic Pistol, Clones And Models

 

Note :  Prices Are Labor Only And Do Not Include The Parts Or Finishing

 

 

Trigger Adjustments

 

Action Job

$125.00

Install Rogers Mechanical Trigger System 

$351.00 

Install Aftermarket Triggers 

$30.00 

 

 

Scope Mounting

 

IPSC Pistols 

$120.00 

 

 

Sight Installations (Front) 

 

Clark

$50.00 

Staked in Original Hole (repair) 

$35.00 

Silver Soldered 

$50.00 

Night Sight Installed (Staked) (+parts) 

$55.00 

Cross Dovetail Front Sight Cuts 

$50.00 

 

 

Colored Sight Dots Installed 

 

Single Dot Front Sight 

$30.00 

Triple Dot 

$65.00

 

 

Rear Sights 

 

Novak Low Meld 

$90.00

Kimber Fixed Sight Adjustable Cut 

$90.00 

Kimber Style Bo-Mar Lo-Meld 

$90.00 

S&W Style N Frame Sight Mod 27 into Dovetail 

$160.00 

Bo Mar Style BMCS Low melt Standard Cut 

$125.00

Combat Low Meld Shrouded Head Bo Mar Style 

$175.00 

High Visibility Fixed Rear 

$35.00 

High Visibility Adjustable Rear 

$35.00 

Night Sights 

$55.00 

We Sight in Your Firearm – Ammo not Included 

$35.00 

Note: Origin of MELD, a blend of melt and weld, First Known Use: 1936 and it referred to the fittting of a part and welding of the part to structure

 

 

 

Custom Accessories Installed 

 

Minimum Labor 

$50.00

Extended Standard Thumb Safety 

$35.00 

Ambidextrous Safety’s 

$40.00 

Beavertail Grip Safety (Wilson and S&A) 

$75.00 

Beavertail Grip Safety (Brown and STI) 

$95.00 

Tune Extractors 

$20.00

Kreiger Accurail System 

$296.00 

S & A Ambidextrous Magazine Release 

$50.00 

Fit S & A Magazine Guide to Frame 

$85.00 

Brown Maxi-Magwell 

$130.00 

Over Size Stock Bushings 

Per set $30.00 

Extractors or Ejectors Installed and Fitted 

Labor only $20.00 

Adjust High Cap Mag for Function (Plus ammo if needed) Each 

$60.00 

 

 

Alteration To Frame And Slide

 

Square Trigger Guard 

$80.00

Funnel Magazine well 

$85.00 

Custom Carry Bevel Package 

$75.00 

Extreme Meld Down Clark Style Trigger guard 

$265.00 

Relieve Grip Frame Under Trigger Guard 

$50.00 

Tighten Frame and Slide 

$95.00 to 125.00 

Lower Ejection Port 

$35.00 

Flare Ejection port 

$35.00 

Clark Giles Adjustable Slide Tightener 

$160.00 

Skeletonize Slide (Per Cut) 

$45.00 

Flat Cut Top of Slide 

$50.00 

Cocking serrations (Front of Slide) 

$150.00 

Line Top of Slide (Slide must be flat cut first) 

$150.00 

S & A Para Ordinance (Magazine Guide) 

$100.00 

 

 

Compensator Systems

 

Single Chamber (One or two Ports) 

$400.00 

Single Chamber (Three Ports) 

$425.00 

Dual Chamber (Two Port) 

$475.00 

Dual Chamber (Three Port) 

$525.00.00 

Dual Chamber (Full Profile) 

$700.00 

Guide Rod 

$25.00-100.00 

Recoil springs 

$8.00 

Match barrels 

$150-300.00 

Fitting Barrels See Prices Above. 

 

For .45 ACP, 10MM, 40 S&W, or 38 Super compensator type systems. 

 

They include the following: 5” or 5-3/4” match barrel, Lower ejection port, new recoil spring, full length or extended configuration. 

 

 

 

Checkering And Stippling Notas 

 

Please Read: There may be Extra Charges For Checkering and Stippling on specific brands as some manufacturers employ extra hardening techniques or unique alloys. The base prices above are for Colt and Springfield Armory 4140 standard type Chrome-Moly frames.

 

 

 

The “harder alloys” results in increased tool wear and time by the pistol-smith/craftsman. 

 

This is entirely done by hand in the old world tradition. It is unmatched by machine type processes which look like they were done with a machine. 

 

 

 

Add : If you wish finer checkering with more lines than are usually standard for that particular position, please add 15% to the base price.

 

 

 

Add : Again very hard aftermarket receivers like Caspian, and Kimber, or stainless steel frames, please add 25% to the base prices. 

 

 

 

Front Grip Frame (20 Lines Per Inch) 

Checkering $200.00 

 

Stippling $105.00 

High Capacity Frames (20 Lines Per Inch) 

Checkering Only $325.00 

Front Trigger Guard (40 Lines Per Inch) 

Checkering $75.00 

 

Stippling $40.00 

Main Spring Housing (20 Lines Per Inch) 

Checkering $55.00 

 

Stippling $40.00 

Line Back Of Slide (40 Lines Per Inch) 

Line $45.00 

Checkering Back Of Slide (40 Lines Per Inch) 

Checkering $105.00 

 

 

Barrel Changes And Alterations 

 

Fit Clark, King, National Match Bushing to Your Barrel 

$35.00 

Throat Barrel and Polish Feed Ramp 

$45.00 

Hard Fitting Barrel (Inc. re-welding lugs and barrel to bushing) 

$185.00 

Frame Cut For Supported Ramp Barrels 

Add $100.00  

Fitting Match Grade Barrel & Bushing to your Firearm ( to 7”) 

$170.00 

Jewel Chamber of Auto Barrels 

$35.00 

Laser Porting Semi- Auto (Two ports) 

$145.-$150.00 

 

 

Custom Carry And Self-Defense Weapons 

 

People buy carry guns with the hopes that they will never have to use them.  

Unfortunately there are times when reality sets in and the need is justified for self–defense.  

Tailoring a carry firearm to the individual is a critical step in the process, more so, than for just punching holes in paper. 

 

The stakes are much higher and the stress requires a melding of the shooter and the firearm. 

 

 

 

Colt Officer And Combat Commander Style Firearms 

 

Compensator system 

$325.00

New Colt Barrel - 

Based on Market Price 

Guide Rod System (Parts and Labor) 

$100.00 

S & A Grip Safety 

$75.00 

S & A Magazine Guide (Part Only) 

$88.00 

Trigger and Action Tune (Labor Only) 

$125.00 

Carry Bevel Package 

$75.00 

Extended Thumb Safety (Installation Only) 

$35.00 

Checker Grip Frame (Starts At) 

$200.00 

 

 

Colt 380 Pistols 

 

Action Job 

$125.00 

Bobbing the Grip Tang (Prevents Bite) 

$50.00 

Carry Bevel (Breaks all surface edges) 

$50.00 

Checker (30L.P.I.) Front of grip 

$195.00 

Novak Three Dot Sights (Installation Only) 

$140.00 

McDougal Trigger 

$35.00 

McDougal Guide Rod 

$50.00 

 

 

Custom Carry Revolver Modifications 

 

Note: Comp Systems on blued firearms require refinishing. 

 

Internal Barrel Compensator (3” barrel only = OD of barrel) 

$235.00 

Action Tuned for Street 

$95.00 

Bevel Hammer 

$30.00

Custom 3 inch Barrel with Compensator 

$500.00 

Magna Porting 

$135.00 

 

 

Competitive Upgrades For Bullseye, World Speed, Bianchi Cup

 

Ruger Competition Pistols 

 

Compensator System 

$300.00 

Trigger Job 

$130.00 

Chrome Plating Starts at: 

$200.00 

Williams Adjustable Target Sights (Installed plus parts) 

$105.00 

Custom Under Shroud 

$305.00 

Clark Premium Barrel Plus Installation 

$176.00 to $246.00 

Front Sights Installed 

$60.00 

 

 

Cowboy Action Shooting 

 

Single Action Revolvers (Tuning The Action By Brand) 

 

New Model Ruger’s with grip frame locking mechanism Add 

$25.00 

Ruger or Colt 

$130.00 

Italian Manufactured Colts 

$160.00 

Bisley Frames (please add) 

$20.00

Re-install or Replace Front Sight 

$70.00 

Cut and Crown Barrels 

$90.00 

Fanning Hammer Spurs for Fast Draw Modify, Adjust Rear sight 

$95.00 

Ruger - Fast Draw For Cowboy Action 

$185.00 

 

 

The Ernie Hill Style Fast Draw Revolver Conversion 

 

Complete fast draw conversions on your old model Ruger 357 Magnum 

 

which duplicates the Ernie Hill style which made him famous. 

$1545.00 on your supplied firearm 

 

 

Lever Action Rifles

 

Nickel or Chrome Plating of Receiver, Lever and Assembly 

Starts at: $200.00 

Nickel Stained Receiver to Replicate Case Hardening (add) 

$60.00 

Saddle Rings 

$40.00 

Peep Sights Installed on Tang 

$75.00 

Trigger Pull Lightened 

$95.00 

Smooth Entire Lever –Action System, includes Action Job to Competition Level and Hard Chrome Plate Action Parts 

$230.00

Shorten Barrel and Magazine Tube and Re-install Front Sight 

$305.00 

 

 

Shotguns For Cowboy Action 

 

Cut And Crown Barrels 

 

Single Barrel 

$60.00 

Double Barrels 

$120.00 

Nickel or Chrome Receiver Start at: 

$228.00 

Nickel Stain Receiver to look like Case Hardening 

 

Double Barrel 

(additional fee) $88.00 

EXTEND and Polish Forcing Cones Single Barrel 

$100.00 

Smooth Opening of Double Barrel, Includes Action Job 

$250.00 

Regular Action Job 

$125.00 

 

 

Rifles For Sport, Hunting, Defense, 

 

Shotgun Smithing – Remington 1100, 1187, And 870 

 

Drilling and Tapping for Scope Mount Bases ( 4 Hole version) 

$84.00 

Scope Mounting and Installation 

$55.00 

Trigger Adjustment, most Remington’s, Auto and Pump 

$95.00 

Cogan Barrel porting System 

$135.00 

Jewel Finish the Bolt 

$80.00 

Cut and Crown Shotgun Barrel 

$60.00 

Cut and Crown Double Barrel Shotgun

$120.00 

Oversize Safety Installed 

$30.00 

Gas Ports Enlarged 

$35.00 

Clean Oil and Test Fire Single Barrel 

$45.00 to $85.00 

Double Barrel, Clean Fire, Oil and Test 

$75.00 to $125.00 

Open Ejection Ports 

$50.00 

Extend Forcing Cones and polish 

$100.00 

10 Shot Magazine Extension 

$55.00 

Install Front Sight Bead (Bead Extra) 

$25.00 

Sun Spot Front Sight and Millet Rear 

 

Fiber optic Front Sight 

$60.00 

 

 

Rifle Smithing 

 

Clean Oil and Function Test by Staff 

$45.00 to $85.00 

Scope Base and Ring Installation 

$55.00 

Zero Scope (Live Fire plus Ammo) 

$50.00 

Reshape Bolt Handle to Clear Scope (need both rifle and scope) 

$100.00 

Supply and Install Bolt handle for Scope on MILITARY Rifles 

$125.00 

Bore- Sight Rifle with Laser 

$35.00 

Drilling and Tapping Per Hole 

$16.00 

Drilling and Tapping Set-up per Job 

$20.00 

Recoil Pad Installation (No Stock Alterations) 

$45.00 

Recoil Pad Installation – (Cut Stock, pull length or for Kids) 

$75.00 

Jewel Bolt 

$75.00-$100.00 

Checkering Bolt Heads (Per side) 

$50.00 

Installing Sling Swivels – One Piece Stock

$50.00 

Installing Sling Swivels - Two Piece Stock 

$50.00 

Cut and Crown Rifle Barrels 

$50.00 

Custom Design Rifle Compensator – Starting at: 

$150.00 

Threading Barrels for Comps or Suppressors

$100.00 

Open Sight Installation, Per screw Hole 

$16.00 

Open Sight Set up Fee 

$32.00 

 

 

Trigger Adjustments Popular Rifles 

 

Remington Pump, Semi-Auto 

$95.00

Remington, Winchester, Ruger, Bolt Actions

$115.00 

AR-15, Mini-14, and M1A 

$125.00 

Install and Adjust Aftermarket Triggers 

Starts at: $85.00 

Browning BAR 

$115.00 

 

 

Assault Rifle Compensators 

 

AR-15 and M-16 Cogan Custom 

$90.00 

M1A and M-14 Cogan Custom 

$70.00 

 

 

Bull Barreled Ruger 10-22 Rifles 

 

Re-barrel Rifle Installation 

$85.00

Re-Stock With Hogue Over Molded Stock – Installed Includes Stock 

$125.00

Fancy thumb hole Stocks- Start at: 

$335.00 

 

 

Assembly And Dis-assembly 

 

1911 Colts, Colt Clones, Semi-Autos, Glock, Kel-Tec, & Standard Sig Pistols 

$45.00 

S&W, Colt, Ruger & Taurus Revolvers 

$45.00 

Desert Eagle, H&K, EAA & Springfield XD 

$60.00 to 75.00 

Para-Ordnance LDA Pistols 

$75.00 

Thompson Center Pistols / S & W Revolver W/ New Safety 

$60.00 

XP100 Remington & Savage Strykers 

$55.00 

Remington Pump & Semi-Auto Shotguns 

$45.00 

Browning Pump & Semi or Auto Shotguns 

$65.00 

Benelli & Berretta Semi or Autos Shotguns 

$75.00 

Charles Daily Pump & Semi-Auto Shotguns 

$55.00 

Double Barrel Shotguns Side-By-Side or Over & Under 

$85.00/hour 

Average cost of Double Barrels 

$150.00 

Remington & Ruger Bolt Action Rifles 

$50.00 

Remington Pump & Semi-Auto Rifles, Ruger Semi-Auto Rifles 

$60.00 

Browning Semi-Auto, Lever or Bolt Action Rifles 

$75.00 

Marlin, Winchester, Savage, & Mossberg Lever Action Rifles 

$60.00 to 75.00 

Ruger Single Shot Rifle 

$85.00 

Win. Mod 70/ Mauser/ Mil/ Weatherby, SAKO, Tika Rifles 

$60.00 to 75.00 

 

 

 

 

Notas 

 

 

 

 

 

 

 

 

 

Contact Us